- Basic design features:
The cylinder block design is sturdy and durable, with low vibration and noise; in-line 6-cylinder four-stroke, smooth operation and high efficiency; replaceable wet cylinder liner, long life and easy maintenance; two cylinders and one cover, 4 valves per cylinder, sufficient air intake, high performance zhuoyue; forced water cooling, small heat radiation.
- Fuel system:
Cummins' patented PT fuel system has a unique overspeed protection device; low-pressure oil pipeline, fewer pipelines, low failure rate and high reliability; high-pressure injection, sufficient combustion. Equipped with fuel supply and return check valves, it is safe and reliable to use.
- Air intake system:Equipped with a dry air filter and air resistance indicator, and using a holset exhaust gas turbocharger, the air intake is sufficient and the performance is guaranteed.
- Exhaust system:
The use of pulse dry exhaust pipe can effectively utilize the exhaust gas energy and give full play to the engine performance; it is equipped with an exhaust elbow pipe and exhaust bellows with a diameter of 127mm for easy connection.
- Lubrication system:
60gal variable flow oil pump with main oil channel signal pipe, which can adjust the pump oil volume according to the main oil channel oil pressure.
Optimize the amount of oil entering the engine; low oil pressure (241-345kpa), these measures can reduce pump power
loss, improve power and improve engine economy.
- Cooling system:
The engine uses a gear centrifugal water pump for forced water cooling and a large flow water channel design, which has good cooling effect and can effectively reduce heat radiation and noise. Spin-on water filter that prevents rust and corrosion, controls acidity and removes impurities
- Power output:
A double-slot power output crankshaft pulley can be installed in front of the shock absorber, and a multi-slot accessory drive pulley is installed at the front of the engine, both of which can be equipped with various front-end power output devices. Flywheel and flywheel housing: sae 14” flywheel sae1# flywheel housing engine bracket: the engine is equipped with a total of three brackets at the front and rear.